The prices of plasma cutters have come down so much in recent years that you can actually get a quality plasma cutter for under $300.
Just ten years ago a plasma cutter for under $300 would be unheard of.
Now there are several plasma cutters you can pick up for under $300.
These plasma cutters will not have all the bells and whistles of the more expensive units, but they will get the job done for occasional and light duty usage.
One thing to keep in mind is that most plasma cutters need an external source of compressed air to operate.
You will need an air compressor in addition to the plasma cutter itself.
That is one of the things that surprise newcomers to using plasma cutters.
Ok, so now to the part you have been waiting for!
There are actually a few good plasma cutters for under $300 if you can believe that.
But after considerable research we would recommend the Lotos LT5000D Plasma Cutter at this price point.
The Lotos LT5000D is flexible and has some nice options.
Quick Set Up
Just supply an air and power source to get started using this plasma cutter.
It comes with a plasma torch, consumables, ground clamp, type D air connector, and an air regulator/filter.
Performance
It can run on either 110/120V or 220/240V which is a nice feature for sure and will allow you to use this under $300 plasma cutter just about anywhere.
The Lotus automatically senses the input voltage and frequency (50/60Hz) and switches its operation accordingly.
It will output up to 30A when connected to 110/120V and up to 50A when connected to 220/240V.
When running the Lotus on 110/120V it will clean cut 1/3″ metal and server a maximum metal thickness of 2/5″.
If you plug this under $300 plasma cutter into 220/240V power it will clean cut 1/2″ metal and sever a maximum metal thickness of 3/4″.
Requirements
All you need to get started using this plasma cutter is a power plug, either 110/120V or 220/240V will do, as mentioned above.
The Lotus also requires an air compressor and will consume 4 SCFM @ 70 psi.
There is a pre-installed, 1/4″ NPT type D air connector with an air regulator/filter included.
Warranty
The Lotus comes with a generous 30 day refund period and a one year warranty.
Conclusion
With plasma cutters coming down in prices there are more under $300 options than ever before.
If you want to look at other options to find the best plasma cutter for under $300 for you then check out the link below.
Check Current Plasma Cutter Prices
